Steel structure workshop with crane

The specific construction process of a steel structure workshop with a crane is as follows:

1. Main structural hoisting of steel structures: splicing steel beams on the ground, erecting steel columns, hoisting steel structures, connecting substructures, correcting structural deviations of the main structure, installing crane beams, hoisting sandwiches, applying fire prevention coatings, the deviation of the main structure of the steel structure should meet the specifications and design requirements, and the initial tightening and tightening of bolts should meet the requirements.

2. Maintenance and installation of the steel structure's own wall: mainly installing wall insulation layer and wall panels. The wall surface is mainly aesthetically pleasing and the window area is not afraid of water. In addition, there is also a problem of checking for installation deviations, such as the bottom being flat, the entire plane being flat, and the difference in flatness between panels meeting the requirements.

3. Installation of steel structure roof panels and insulation layers: First lay the insulation layer, then install the roof panels. For some projects, steel wire mesh is laid under the insulation layer to prevent the insulation layer from falling off, which mainly depends on the insulation level. The roof is not afraid of water, so signs are overlapped on the board, nailed on the board, the coating is full, the coating is clean, and the coating on the board surface is not damaged to prevent rust.

4. Secondary structural installation of steel structures (roof building, roof support, flange support, etc.).