Long span steel structure workshop steel metal building in Kenya

The steel metal building of Kenya's large-span steel structure factory building is composed of steel materials and is one of the main types of building structures. The structure is mainly composed of steel beams, columns, trusses and other components made of section steel and steel plates, and adopts rust and rust prevention processes such as silanization, pure manganese phosphating, water washing and drying, and galvanizing. Welds, bolts, or rivets are usually used to connect various components or components. Due to its light weight and simple construction, it is widely used in large factories, venues, super high-rise buildings, bridges and other fields. Steel metal buildings in Kenya's large-span steel structure factories are prone to corrosion. Generally, steel metal buildings in Kenya's large-span steel structure factories need to be rust removed, galvanized, or coated, and regularly maintained.

High strength steel should be studied in the steel metal construction of large-span steel structure factories in Kenya to greatly improve their yield point strength; In addition, new types of steel profiles, such as H-beams (also known as wide flange steel), T-beams, and profiled steel plates, need to be rolled to meet the needs of large-span structures and super high-rise buildings.

In addition, there is a steel metal building system for Kenya's large-span steel structure factory building without thermal bridges. The building itself is not energy-efficient, and this technology uses clever special connectors to solve the problem of cold and hot bridges in the building; The small truss structure allows cables and drainage pipes to pass through the wall, making construction and decoration convenient.

characteristic

1. High material strength and light weight

Steel has high strength and elastic modulus. Compared with concrete and wood, the ratio of density to yield strength is relatively low. Therefore, under the same stress conditions, the component section of steel metal buildings in Kenya's large-span steel structure factory is small, the self weight is light, and it is easy to transport and install. It is suitable for structures with large spans, high heights, and load-bearing capacity.

2. Steel has toughness, good plasticity, uniform material, and high structural reliability

Suitable for withstanding impact and dynamic loads, with good seismic performance. The internal structure of the steel is uniform, almost isotropic and homogeneous. The actual working performance of steel metal buildings in large-span steel structure factories in Kenya is in line with computational theory. Therefore, the reliability of steel metal buildings in large-span steel structure factories in Kenya is high.

3. Kenya has a high degree of mechanization in the manufacturing and installation of large-span steel structure factories and steel metal buildings

The steel and metal building components of Kenya's large-span steel structure factory are easy to manufacture in factories and assemble on construction sites. Mechanized manufacturing of steel and metal building components for large-span steel structure factories in Kenya has high precision, high production efficiency, fast on-site assembly speed, and short construction period. The steel metal building of Kenya's large-span steel structure factory is the most industrialized type of structure.

4. Good sealing performance of steel metal buildings in Kenya's large-span steel structure factory building

Due to the welding structure, it can achieve complete sealing and can be used as high-pressure vessels, large oil tanks, pressure pipelines, etc. with good airtightness and water tightness.

5. Kenya's large-span steel structure factory and steel metal buildings are heat-resistant and fire-resistant

When the temperature is below 150 ℃, there is little change in the properties of the steel. Therefore, the steel metal buildings of large-span steel structure factories in Kenya are suitable for hot workshops, but when the structural surface is exposed to thermal radiation of around 150 ℃, insulation boards should be used to protect it. When the temperature is between 300 ℃ -400 ℃, the strength and elastic modulus of the steel both significantly decrease. When the temperature is around 600 ℃, the strength of the steel tends to zero. In buildings with special fire protection requirements, steel metal buildings with large-span steel structures in Kenya must be protected with fire-resistant materials to improve their fire resistance rating.

6. Poor corrosion resistance of steel metal buildings in Kenya's large-span steel structure factory buildings

Especially in humid and corrosive environments, it is prone to rusting. Generally, large-span steel structure factories in Kenya require rust removal, galvanizing, or coating for steel metal buildings, and regular maintenance is required. Special measures such as zinc block anode protection should be taken to prevent corrosion of offshore platform structures located in seawater.

7. Low carbon, energy-saving, green and environmentally friendly, reusable

The demolition of large-span steel structure factories and steel metal buildings in Kenya hardly produces construction waste, and steel can be recycled and reused.